VLAN Command List

To configure a simple VLAN, first create the VLAN, and then assign ports to that VLAN. The following table shows common VLAN configuration commands.

Example
The following commands create VLAN 12 named IS_VLAN, identifies port 0/12 as having only workstations attached to it, and assigns the port to VLAN 12.

switch#config t

switch(config)#vlan 12

switch(config-vlan)#name IS_VLAN

switch(config-vlan)#interface fast 0/12

switch(config-if)#switchport access vlan 12

By Unknown with No comments